Journal of the Rubber Research Institute of Sri Lanka

Permanent URI for this collectionhttps://dl.nsf.gov.lk/handle/1/8676

Browse

Search Results

Now showing 1 - 10 of 146
  • Thumbnail Image
    Item
    Field performance of young coffee seedlings and cuttings intercropped with rubber
    (Rubber Research Institute. Agalawatta, 1988) Rodrigo, V.H.L.; Nugawela, A.; Kariyawasam, L.S.; Aluthhewage, R.K.
    Coffee may be planted either using seedlings or cuttings. Anyhow, a comparative study of their field establishment and performance has not been made. Iin this study seedlings and cuttings of Coffea canephora intercropped with rubber were compared for their field stablishment and growth. It is evident that there is no difference in the success of their field establishment. The dry matter yield determinants of plants, i. e. light intercept ion, conversion efficiency and rate of loss of dry matter, estimated by total leaf area, CO2 assimilation rate and dark respiratory rate respectively, are also similar in both seedlings and cuttings. This is confirmed by the similar mean total dry weight of a seedlings and a cuttings. The partitioning of assimilates is more towards root development in the cuttings and is evident by the significantly high root dry weight and the root/shoot ratio. The percentage of assimilates partitioning towards the growth of aerial parts is less in the cuttings, i. e. 52 and 67perc. for cuttings and seedlings respectively. Despite of similar light levels, the CO2 assimilation rates are lower in the afternoon in both seedlings and cuttings. The perc. deeline is 23.5 and 18.6perc. for seedlings and cuttings respectively.
  • Thumbnail Image
    Item
    Shoot tip culture as a method of micropropagation of Hevea
    (Rubber Research Institute. Agalawatta, 1988) Gunatilleke, I.D.; Samaranayake, C.
    Shoot tips of Hevea from aseptically grown seeedlings were established in culture on Murashige and Skoog (MS) liquid medium with half strenth salts, supplimented with BAP +IBA or MS solid medium, with full strenth salts with and without BAP + IBA. BAP was found to be better for axillary bud proliferation and growth than the other cytokinines. Proliferation of buds improved with successive subcultures. A multiplication rate of 30 + 2 shoots per explant was obtained with threee subcultures in 165 days
  • Thumbnail Image
    Item
    Effect of potassium and magnesium on growth of young Hevea brasiliensis
    (Rubber Research Institute. Agalawatta, 1988) Weerasuriya, S.M.; Yogaratnam, N.
    The effect of potassium and magnisium fertilisers on growth of young Hevea brasiliensis were studied using clones PB 86, RRIC 100, RRIC 103, and RRIC 121 with the objective of determining the requirement of these elements during the early phase of establishment of these clones. Three commercial fertilisers were evaluated as of magnesium. Potassium requirement of clone PB 86 during the first year was found to be approsimately 33g K/plant/year. It was found that clones. RRIC 100 and RRIC 121 needed higher amount of K than PB 86 for normal growth. Potassium application caused an overall reduction in growth of clone RRIC 103 where the soil K level was 0.07 me./100g suggesting that this level is adequate for this clone during its first year of growth. Total dry weight was significantly increased when Mg application was increased from 11 to 22g/plant/year in clone RRIC 103 but such effects were not seen in clones PB 86, RRIC 100 and RRIC 121
  • Thumbnail Image
    Item
    Secondary characters and their association with latex yield in Hevea brasiliensis(Mull Arg.)
    (Rubber Research Institute. Agalawatta, 1988) Olapade, E.O.
    Ten Hevea clones developed at the Rubber Research Institute Of Nigeria (RRIN) and a control clone RRIM 600 were evaluated for their latex yield after six months of tapping. The mean dry latex yield recorded for each clone was correlated with their Juvenile secondary characters i. e Height, Girth and Plant Vigour at 18 months. Significant variability was exhibited by the clones in terms of yield with clone C 83 having the highest mean latex yield of 42.15 g/t/t/ while clone C 202 had the least mean yield of 22.73 g/t/t. The secondary characters i. e Hewight, Girth and Vigour were significantly positively correlated to themselves but all negatively correlasted to latex yield. However a spurious correlation was established between latex yield and the secondary characters. The implication of the results are discussed
  • Thumbnail Image
    Item
    An analysis of growth patterns of Hevea clones
    (Rubber Research Institute. Agalawatta, 1988) Margret, H.A.W.; Abeyasekera, S.; Jayasekera, N.E.M.
    Four girth measurements collected over four years, before tapping from ten Hevea clones grown in two sites have been analysed to study the growth pattern. Year to year variation in both sites was mainly due t linear component of growth. Growth of individual clones too was mainly due to linear effect. But some clones in one site showed significant quadratic and or cubic component. This was due to non linear growth of plants in some plots. Ten clones have been groued (a) according to the when averaged over four years so that clones within a group have the same average girth and (b) on the gradient of the regression fitted to the girth measurement increasing over the four years. RRIC 52 had the fastest growth in both sites. RRIC 103 had the same growth rates in both sites suggesting that it has a greater stability to local environmental changes.
  • Item
    Preparation of flame resistant rubberised coir
    (Rubber Research Institute. Agalawatta, 1987) Coomarasamy, A.
  • Thumbnail Image
    Item
    Investigation of some factors which effect on rate of evaporation of antioxidants and ultraviolet stabilizers
    (Rubber Research Institute. Agalawatte, 1996) Goonetilake, S.A.P.P.; Billingham, N.C.
    Volatility is a physical property which effect the retention of antioxidants during processing and use of polymeric products. The volatility data abtained for such compounds are very useful in choosing an antioxidant for particular application. In this study measurement of volatilities of some phenolic antioxidants and UV stabilizers were done by using an apparartus specially designed for this purpose. It is apparent that the molecular weight and the molecular structure have a significant effect on the evaportion rate of the antioxidants as well as UV stabilizers. The polarity of the compounds also reduces the volatility while the environmental conditions such as vacuum enhances the volatility by a factor of 10.
  • Thumbnail Image
    Item
    A study of the rate of dissolution of different grades of latex crepe rubbers in petroleum solvents
    (Rubber Research Institute. Agalawatta, 1987) Tillekeratne, L.M.K.; Perera, M.C.S.; Weeraman, S.
  • Item
    Effect of leaf litter on direct and indirect mobilization of P from apatite
    (Rubber Research Institute. Agalawatta, 1987) Pathiratne, L.S.S.; Waidyanatha, U.P. De S.; Peries, O.S.
    Leaf litter as direct and indirect means of improving P availability from apatite was tested. Application of leaf litter impo=roved the P uptake by indicator crops but did not influence the availability of P from applied apatite.
  • Thumbnail Image
    Item
    Virgin bark tapping of some RRIC 100 series clones
    (Rubber Research Institute. Agalawatta, 1987) Samaranayake, C.; Waidyanatha, U.P. De S.; Pathiratne, L.S.S.; De Soysa, A.G.A.
    All RRIC 100 series clones reached tappability much earlier than the two control clones viz. RRIM 600 and PB 86. Significantly higher yield per tree per tapping was obtained in the first year on a 1/2 S d/3 system compared to 1/2S d/2 tappings in many of the clones tested. However, during the second year there was no significant differences in yields obtained on both frequencies indicating that the tree was able to replenish the latex removed in a tapping, much faster than in the first year of tapping. The data presented indicate the possibility of tapping all recommended clones on 1/2S d/32 system of tapping from the second year, without any adverse effects.